T300 – THROUGH CONDUCT VALVE
The Model 300 is a Bidirectional cutting wafer knife gate valve where the knife moves completely through the inner part of the body cutting the flow. The knife has a central round-shaped blade which, when opened, aligns with the bore of the valve hole, forming a clean straight-through path. Therefore, the fluid flows without any obstacle.
Designed for fluids with suspended solids, with a maximum concentration of 20%.
Internal guides for smooth movements.
High temperature design available with internal graphite sealings
* Valves manufactured following European Pressure Equipment Directive PED 2014/68/EU.
- DIN PN10 / PN16 / PN25
- ANSI 125/150
- BST “E” / BST “D”
- JIS 5K / 10K
PRESSURES & SIZES
- DN50 (2”) – DN250 (10”) 10 bar
- DN300 (12”) – DN450 (18”) 6 bar
- DN500 (20”) – DN600 (24”) 4 bar
*Higher pressure designs on request
GG25, GGG40, GGG50, A216 WCB, CF8 (SS304), CF8M (SS316), 254SMO, SS310, SS904
EPDM, NITRILE (NBR), SILICONE, VITON, GRAPHITE, FLUCAST, PTFE
SS304L, SS316L, SS316TI, SS310, SS904L, 254SMO, HARDOX,
SYNT+PTFE, Pure PTFE, GRAPHITE, CERAMIC
EPDM, NBR, SILICONE, VITON
Manual, pneumatic, hydraulic, electric, gear box, hand lever, square end, chain-wheel, pneumatic with security handwheel
Limit switches, proximity sensors, solenoid valves, positioner 4/20mA, sleeves, locking devices, extension, regulation v-ports, bonnet…etc.
Wastewater treatment plants, Power Plants, bulk handling, Pulp & Paper, mining, Chemical Industry, food & beverage…