• s/a pneumatic actuatros
    S/A PNEUMATIC ACTUATORS

    We manufacture our own single acting pneumatic actuators. They are specifically designed to suit Zubi Valves Knife Gate valves. Special design and adaptations according customer requirements are possible. Fail to close and fail to open versions available.

  • pneumatic actuators
    D/A PNEUMATIC ACTUATORS

    We manufacture our own double acting pneumatic actuators. They are specifically designed to suit Zubi Valves Knife Gate valves. Special design and adaptations according customer requirements are possible.

  • channel penstock valve
    VCTL – CHANNEL PENSTOCK

    Channel penstock ensure tightness on all three sides (at the bottom and the two sides), thanks to the closing seal located on the penstock seat area. The standard design is embedded in a concrete channel and the sealing could be unidirectional or bidirectional. Used for on-off or control applications in open channels (3 sides)

  • wall penstock valve
    VMCL – WALL PENSTOCK

    Wall penstock valves ensure watertightness on all four sides, made even more effective by a wedged system which apply pressure on the seat when the gate is in closed position. Used for on-off or control applications,wall-mounted.

  • t115 threaded ball check valve
    T115 – 99AR – THREADED BALL CHECK VALVE

    115AR model is self cleaning unidirectional threaded ball check valve. The ball rotates during operation eliminating the risk of impurities getting stuck on the ball. BSP and NPT connections.

  • t115 ar ball check valves
    T115AR – BALL CHECK VALVE

    115AR model is self cleaning unidirectional Flanged type ball check valve. The ball rotates during operation eliminating the risk of impurities getting stuck on the ball.

  • t114 ar disk check valve
    T114AR – DISK CHECK VALVE

    114AR is a Flanged check valve made in 2 parts (upper/lower) with a central rubber coated disc. Many different rubber linings available, ideal for corrosive and abrasive duties.

  • T133AR disk check valve
    T113AR – TILTING DISK CHECK VALVE

    Unidirectional Metal seated oblique angeled check valve. Prevents fluid returning through the pipe. Light design. Auxiliary spring option improves closing time ad reduces water hammering.

  • T100E angled shape valve
    T100E – ANGLED SHAPE

    Angled shape model T100E is a bidirectional monoblock casted body bolted bonneted diaphragm valve. Lined and unlined options available. Ideal for general industrial corrosive and abrasive applications up to 15% solid services.

  • straight or weir valve
    SW/BW versions – STRAIGHT or WEIR

    Diaphragm bidirectional monoblock casted body with weld ends and bolted bonneted. Welded version available in straight (T85) or weir (T100) type. Rubber line options No available.

  • t85/99 threaded straight through
    T85/99 – THREADED STRAIGHT THROUGH

    Threaded straight through type model T85/99 is a bidirectional monoblock casted body bolted bonneted diaphragm valve. Threaded connection. Rubber line options No available.

  • t99 threaded weir
    T99 – THREADED WEIR

    Threaded weir type model T99 is a bidirectional monoblock casted body bolted bonneted diaphragm valve. Threaded connection. Rubber line options No available.

  • straight through
    T85 – STRAIGHT THROUGH

    Straight through type model T85 is a bidirectional full bore monoblock casted body bolted bonneted diaphragm valve. Lined and unlined options available. Ideal to handle high abrasive fluids.

  • T100 Weir
    T100 – WEIR

    Weir type model T100 is a bidirectional monoblock casted body bolted bonneted diaphragm valve. Lined and unlined options available. Ideal for general industrial corrosive and abrasive applications up to 15% solid services.

  • Square model valve
    SQUARE MODEL VALVE

    Square/rectangular port fabricated knife gate valve available in unidirectional or bidirectional seat design. Welded body construction made from several materials: Fabricated steel, stainless steel and special alloys.

  • fabricated single wedge
    FABRICATED SINGLE WEDGE

    Single wedge is an unidirectional or bidirectional type knife gate valve design. Full flange (welded) sturdy design ideal for high pressure and severe working conditions.

  • T500/T500BI high pressure
    T500/T500BI – HIGH PRESSURE

    Unidirectional and bidirectional Bolted Bonneted flanged type high pressure design knife gate valve. Pressures up to PN25. Thanks to its sturdy design, this valve provides better features as regards water tightness and working pressure.

  • T300 short slurry valve
    T300 – SHORT SLURRY

    The model 300-Short is a bidirectional slurry knife gate valve equipped with two abrasion resistant rubber sleeves protecting the body. Additionally the design allows internal cleaning/maintenance through flushing ports located in the bottom cover.

  • RC – ROUND SQUARE

    The square round Wafer knife gate is a heavy duty valve design for handling difficult applications. This valve is suitable for use in recycling applications, like rubbish or sand traps of pulpers, high consistency cleaners… or as silo outlet with solid material.

  • knife gate valves T300 Through Conduit
    T300 – THROUGH CONDUIT

    The model 300 is a bidirectional wafer type self cleaning knife gate valve with a central round shaped through going “o” ported knife. This design secures a really safe and total shut-off against static and highly concentrated pulps.

  • knife gate valves T400 Silo Type
    T400 – SILO TYPE

    The model 400 knife gate valve is a unidirectional wafer monoblock valve designed for industrial general service. Mainly used in bulk handling applications, discharge of powders and solids as OFF seat position (prevent solid accumulation in the seat area). Low pressure duty in solid discharge lines.

  • Knife Gate Valves T700
    T700

    The model 700 knife gate valve is a monoblock body design full bore bidirectional shut off valve, offering a zero leakage shut off up to 10 bar to size DN250. DN300 available in two piece body version up to 6 bar.

  • T200 tappi valve
    T200 – TAPPI (MSS SP-81)

    The model 200 TAPPI is a monoblock body design full bore “lugged” valve. Face to face dimensions and pressure rates according to MSS SP-81 and TAPPI Tis 405-8. Available in unidirectional and bidirectional versions.

  • T200 tappi valve
    T200LUG

    The model 200LUG knife gate valve is a unidirectional or bidirectional full lug valve designed for industrial applications in general.

  • T700 - Knife Gate Bidirectional
    T200 – BIDIRECTIONAL

    The model 200 is an Bidirectional monoblock body design knife gate valve used in general industrial applications.

  • Knife Gate Valves Unidirectional T200
    T200 – UNIDIRECTIONAL

    The model 200 is an unidirectional monoblock body design knife gate valve used in general industrial applications.